OWEN POWERED ACCESS LTD

...a high level of safety   07786624765

Upright UL20 Vertical  

So why choose the Upright UL20 machine for your work at height?

The Upright UL20 is a versatile access platform used mainly inside buildings for jobs such as lighting maintenence or decorating. At 305kgs its light enough to be manouvered by a single operator subject to smooth even floor surfaces such as factories, workshops and halls, with a fully extended boom it can allow work at heights of up to 20ft.

The Upright UL20 features wind down stabiliser legs for a fast no hassle set up. With safety interlocks on the jack legs, operation is prevented if the machine is not correctly set up.

The Upright runs from a 110v supply (transformer from 240V) so is quiet and fume free in use.

The platform has a small foot print, aprox 1m / 3ft square, about the size of a standard pallet.

 

The Upright is a cost effective working tool when you consider the speed of set up and rig down, the safety of your employee's and the minimum disruption to others in the area. It can be far faster than aluminium scaffold if the job is a moving one, ie many light fixtures.

 

Our platforms are serviced and LOLER inspected, the operator is IPAF trained and insured ensuring a safe and productive working enviroment.

Many customers prefer the hire with an operator allowing them to get on with their job while the operator makes getting to it easy.

 

Hire rates for the Upright UL20 are as follows:

Daily rate for self drive with machine familiarisation  £85 +VAT

Additional day(s) hire for self drive customers £65 + VAT

5 day working week £250 + VAT (Reduced rate of £50 per day)

8 hour working day with IPAF trained operator £180 + VAT

Short duration work can be undertaken at  £30 + VAT per hour

For short duration work a minimum 2 hour hire applies £60 + VAT

 

If you have any queries regarding longer or short duration hires rates please call or e-mail and I  will be happy to answer your questions.

 

Tel: 07786624765

E-mail: [email protected]